L4IPEA2 (V2.0A)





    IMPORTANT NOTE:
    Please read the notes carefully before updating BIOS.
    1.Do not update the BIOS if the system is running fine. Unsuccessful BIOS flash may cause the system fails to boot up. The manufacturer is not responsible for any BIOS flash failure.
    2.Make sure your M/B PCB version number first, and then read the updated description & special note carefully to check if the new BIOS version patch pertain to your current problem.
    (How to recognize the M/B PCB version)
    3.Please DO NOT reboot system,unplug power supply and remove battery during BIOS update process.
    4.It is recommended to use the updated flash utility included in each BIOS download package.
    (How to use flash utility).

    Question
    What is the maximum CPU and HDD capacity supported on L4IPEA2 v2.x? 


    Answer
    L4IPEA2 v2.x, maximum CPU and HDD supported information as below,
    HDD: 250G
    CPU: Pentium 4 400Mhz FSB (256K/512K L2 cache) CPU – 2.0G 
               Pentium 4 533Mhz FSB (512K L2 cache) CPU – 2.8G 
               Pentium 4 533Mhz FSB (512MB/1M L2 cache) HT CPU – 3.06G
               Celeron 400Mhz FSB (128K L2 cache) CPU – 2.8G



    Question
    Does L4IPEA2 support Hyper-Threading Pentium 4 CPU? 


    Answer
    Yes, the L4IPEA2 V1.1 supports Intel's Hyper-Threading technology. If you install a CPU with Hyper-Threading such as P4 3.06G on this MB, there is "Hyper-Threading technology" item in BIOS to let you enable or disable this new feature.


    Question
    How many channels does the onboard audio of L4IPEA2 V1.1 support? 


    Answer
    The L4IPEA2 V1.1 is built in CMI 9739 Audio chip with additional Dolby Digital decoder which supports up to 6 channels.


    Question
    Does L4IPEA2 V1.1 support USB2.0? 


    Answer
    Yes, the L4IPEA2 V1.1 comes with Intel ICH4 chip which supports USB 2.0.


    Question
    Does L4IPEA2 V1.1 support 80GB HDD & higher? 


    Answer
    Yes, the L4IPEA2 V1.1 supports hard drive capacity up to 160GB.


    Question
    Does P4IPEA2 support AGP 8X? 


    Answer
    No, the P4IPEA2 V1.1 supports AGP mode up to 4X (1.5V only). You can install an AGP 8X card on this MB but the card will run with AGP 4X mode.


    Model: L4IPEA2
    PCB Version: V2.0A
    Expansion_Slot: AGP4X
    USB: 2.0
    Audio Pin: Front Panel Audio Connector
    USB Pin: Front Panel USB Connector
    IR Pin: Infrared Port