Please select a language.
  • Global

  • Global English  
  • America

  • U.S. English  
    Latin America-Spanish  
    Latin-Portuguese  
  • Asia

  • Japanese  
    Simplified Chinese  
    Traditional Chinese  
    Korean  
    Thai  
    Indonesian  
    Vietnamese  
  • Europe

  • French  
    German  
    Russian  
    Spanish  
    U.K. English  
    Polish  
    Turkish  
    Italian  
  • Middle East

  • Israel-Hebrew  
    Persian  
    Arabic  
     Home > Products > IPC 

    The specifications may be slightly different by region accordingly. Please contact your local dealer for more details.
     
    945GSED-I (V1.0)
    The first ECS platform based on the best combination of the Intel 945GSE and ICH7M chipset plus support Intel Mobile Diamondville CPU
  • Supports the latest Atom single core processors N270 up to FSB 533MHz
  • Integrated DDR2 533 memory controller.
  • Provides the optimized performance with ultra-low-power and low cost.



  • More pictures
     
    Where to buy
     
    CPUº N270, onboard Intel Atom (Mobile Diamondville) single core FCBGA 437-pin
    º 1.60G Hz CPU speed with 512KB cache
    º FSB 533MHz system bus
    System Memoryº Single-channel DDR2 memory architecture
    º 1 x 240-pin DDR2 DIMM socket support up to 2 GB
    º Support DDR2 533/400 DDR2 SDRAM
    Chipsetº Intel 945GSE & Intel ICH7M
    BIOSº AMI BIOS with 4Mbit Flash ROM
    Rear I/Oº 1 x PS/2 keyboard & PS/2 mouse connectors
    º 4 x USB ports
    º 2 x RJ 45 LAN connector
    º 1 x Audio port (Line Out/ Mic in)
    º 1 x VGA Port
    º 1 x Serial Port (COM1)
    º 1 x Parallel Port
    Internal I/O & Headersº 1 x 20-pin ATX Power Supply Connector
    º 1x USB 2.0 header support additional 2 USB ports
    º 1 x SYS_FAN connector
    º 1 x IDE connector
    º 1 x Front panel switch/LED header
    º 1 x Front panel audio header
    º 2 x Serial ATA connectors
    º 4/7 x Serial port headers
    º 1X Intruder header
    º 1X Parallel port header
    º 1X VGA header
    º 1X Digital I/O header
    º 1X LVDS header, 18 or 24 bit
    VGA Frame Buffer Sizeº Max.up to 128MB frame buffer sharing system memory
    Accessoriesº 1 x 40/44 pin IDE cable
    º 1 x SATA/Power cable
    º 1 x SATA cable
    º 1 x Print cable
    º 2 x COM Port cable
    º 1 x I/O shield
    º 1 x User Manual
    º 1 x Driver CD
    Ethernetº Realtek RTL8102E 10/100 LAN
    º Realtek RTL8111C Giga LAN
    Audioº Realtek ALC662 High Definition audio CODEC
    Resolutionº Single display mode:
        • CRT: 1680 x 1050 ; LVDS LCD: 1600 x 1200
    º DualView mode
        • CRT: 1680 x 1050 ; LVDS LCD: 1600 x 1200
    Operation Humidityº 10%~90% relative humidity, non-condensing
    Operation Temperatureº 0-60℃
    Sizeº 170 x 170 mm


    IMPORTANT NOTE:
    Please read the notes carefully before updating BIOS.
    1.Do not update the BIOS if the system is running fine. Unsuccessful BIOS flash may cause the system fails to boot up. The manufacturer is not responsible for any BIOS flash failure.
    2.Make sure your M/B PCB version number first, and then read the updated description & special note carefully to check if the new BIOS version patch pertain to your current problem.
    (How to recognize the M/B PCB version)
    3.Please DO NOT reboot system,unplug power supply and remove battery during BIOS update process.
    4.It is recommended to use the updated flash utility included in each BIOS download package.
    (How to use flash utility).

    Question
    How can I have the "VGA2 pin header" & onboard D-Sub port work at the same time on 945GSED-I? 


    Answer
    945GSED-I does not allow you to use "VGA2 pin header" & onboard D-Sub port at the same time. You can only choose one of them to operate on the MB.
    You can refer to the pictures below for the locations of "VGA2 pin header" & onboard D-Sub port on the board.









    Awards