 |
|
FSB 533MHz
Supports 533MHz front side bus Intel Pentium 4 CPU |
|
|
|
 |
|
ATA133
Supports Ultra DMA 33/66/100/133 IDE devices, data transfer rate up to 133MB/s |
|
|
|
 |
|
6-Channel Audio
Onboard 6-channel audio CODEC supports uncompromising DVD audio quality, bringing a move vivid sound experience and high-quality 6-channel audio without having to buy advanced sound cards |
|
|
|
 |
|
10/100 LAN
Provides 10/100 Mbps solution to your network or broadhand connection without having to buy an extra LAN card. |
|
|
|
 |
|
USB 2.0
USB2.0 is the latest connectivity standard which delivers transfer speeds up to 480Mb/s for easy connectivity and ultra-fast data transfers. |
|
|
|
 |
|
DDR 266
Enables bandwidth up to 2.1GB/s providing enhanced system performance |
|
|
|
 |
|
AGP 4X
AGP 4X supports 1 GB/s data rate and runs at 266MHz. |
|
|
| |
 |
| CPU | º Socket 478 for latest Intel Pentium 4 / Celeron processor
º FSB 533/400 MHz
º Supports Hyper-Threading Technology CPU
| | CHIPSET | º VIA® P4M266A & VT8235
º North Bridge: VIA® P4M266A
º South Bridge: VIA® VT8235
| | GRAPHICS | º Integrated S3 ProSavage8 2D/3D Graphics
º Share Memory : 8/16/32MB
| | MEMORY | º 2 x 184-pin DDR DIMM socket support up to 2 GB
º Support DDR266/200 DDR SDRAM
Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® 32-bit OS.
For Windows® 64-bit OS with 64-bit CPU, there is no such limitation
| | EXPANSION SLOT | º 1 x AGP 4X slot
º 3 x PCI slots
º 1 x CNR slot
| | STORAGE | º Support by VIA® VT8235
• 4 x Ultra DMA133/100/66 devices
| | AUDIO | º Realtek ALC655 6-Channel audio CODEC
º Compliant with AC'97 2.3 specification
| | LAN | º VIA® VT6103 10/100 Mbps Fast Ethernet PHY
| | REAR PANEL I/O | º 1 x PS/2 keyboard & PS/2 mouse connectors
º 4 x USB ports
º 1 x RJ45 LAN connector
º 1 x VGA port
º 1 x Parallel port (LPT)
º 1 x Serial port (COM1)
º 1 x Audio port (Line-in, Line-out, Mic-in)
| | INTERNAL I/O CONNECTORS & HEADERS | º 1 x 20-pin ATX Power Supply Connector & 4-pin 12V Connector
º 1 x FDD connector supports one 360K~2.88MB FDD
º 2 x IDE connectors
º 1 x IrDA for SIR header
º 1 x SPDIF out header
º 1 x USB 2.0 header support additional 2 USB ports
º 1 x Front panel switch/LED header
º 1 x Front panel audio header
º CD in/ AUX in headers
º CPUFAN/CASFAN connectors
| | SYSTEM BIOS | º Award BIOS with 2Mb Flash ROM
º Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
º Supports ACPI revision 1.0 specification
| | FORM FACTOR & LAYERS | º Micro-ATX Size (244mm*244mm), 4 Layers
|
 Loading... Please wait.
| IMPORTANT NOTE: | | Please read the notes carefully before updating BIOS.
| 1. | Do not update the BIOS if the system is running fine. Unsuccessful BIOS flash may cause the system fails to boot up. The manufacturer is not responsible for any BIOS flash failure.
| | 2. | Make sure your M/B PCB version number first, and then read the updated description & special note carefully to check if the new BIOS version patch pertain to your current problem.
(How to recognize the M/B PCB version)
| | 3. | Please DO NOT reboot system,unplug power supply and remove battery during BIOS update process.
| | 4. | It is recommended to use the updated flash utility included in each BIOS download package.
(How to use flash utility).
|
| | |
Question
Can I mix SDRAM and DDR memory modules on P4VMM2 V1.2 at the same time? |
Answer
No, please don't mix SDRAM and DDR memory modules at the same time. Otherwise, the motherboard may be damaged.
|
Question
Can I mix SDRAM and DDR memory modules on P4VMM2 V3.1 at the same time? |
Answer
No, please don't mix SDRAM and DDR memory modules at the same time. Otherwise, the motherboard may be damaged.
|
Question
Can I mix SDRAM and DDR memory modules on P4VMM2 V5.0A at the same time? |
Answer
No, please don't mix SDRAM and DDR memory modules at the same time. Otherwise, the motherboard may be damaged.
|
Question
Does P4VMM2 V8.1 support 80GB HDD & higher? |
Answer
Yes, the P4VMM2 V8.1 supports hard drive capacity up to 160GB.
|
Question
Does P4VMM2 support AGP 8X? |
Answer
No, the P4VMM2 V8.1 supports AGP mode up to 4X (1.5V only). You can install an AGP 8X card on this MB but the card will run with AGP 4X mode.
|
Question
What is the APM spec supported on P4VMM2 V8.1? |
Answer
The P4VMM2 V8.1 is cpmpliant with APM V1.2.
|
Question
What is the DMI version supported on P4VMM2 V8.1? |
Answer
The P4VMM2 V8.1 is compliant with DMI V2.3.
|
Question
What is the AC97 spec supported on P4VMM2 V8.1? |
Answer
The P4VMM2 V8.1 is compliant with AC97 v2.3.
|
Question
Does P4VMM2 V8.1 support Hyper-Threading technology or not? |
Answer
Yes, the P4VMM2 V8.1 supports Hyper-Threading technology.
|
Question
Which type of AGP card is supported by P4VMM2 V7.3 & does it support PC2700 DDR module? Can I install PC3200 DDR RAM with FSB 533 MHz on this MB? |
Answer
1.The P4VMM2 V7.3 is compliant with 1X/2X/4X AGP 2.0 card with 3.3V and 1.5V.
2.The P4VMM2 V7.3 only supports PC2100 DDR. But you still can use PC 2700 DDR, the memory speed will
downgrade to PC2100.
|
Question
Why does the system freeze/hang if I try to open many layers in Adobbe Photoshop? |
Answer
Please update BIOS to v1.1F attached below to solve this Adobe Photoshop 7 issue.
|
Question
Why BIOS detected 1.8GHz at POST screen when I installed a P4 2.4GHz CPU on P4VMM2 V8.1 M/B? |
Answer
During POST, please press "Del" key to enter BIOS Setup & set the right CPU clock. The setting depends on the FSB of your CPU. (For example, if the CPU is P4 2.40G/533MHz FSB, please set the CPU clock to 133MHz.)
|
Question
What is the maximun cpu speed for the P4VMM2 V1.3? |
Answer
The P4VMM2 V1.3 supports CPU up to P4 2.6GHz( FSB 400MHz).
|
Question
Does P4VMM2 V8.1 support CeleronD 315(2.26GHz) or 320(2.4GHz) E0 stepping CPU? |
Answer
Yes, the BIOS v1.1F of P4VMM2 supports P4 Prescott 3.4G E0 & Celeron D CPUs without any problems.
|
Question
Why the P4VMM2 V1.3 can not bootable when I install ATI Radeon 9600 VGA card in system? |
Answer
Please make sure the APG card is 8X because M/B supports AGP 4X only.
|
Question
I am unable to save BIOS settings even if BIOS Protect jumper is disabled. The system hangs upon pressing "Y" when saving BIOS changes. The message "Press F1 to resume" always appears on startup. |
Answer
Please update P4VMM2 8.1 BIOS to v1.1f to patch this issue by following steps.
1. Extract the utility to a disk and copy BIOS .bin file to this disk.
2. Boot from floppy with bootable disk.
3. Insert the disk(with utility and BIOS)
4. Execute the awd832b XXX.bin /sn/py/r
5. Load the default setting.
6. Save the BIOS then restart the system.
|
Question
How can I disable the integrated video card while installing a new extrenal AGP card on the M/B? |
Answer
The integrated video card will be disabled automatically when you install an external AGP card.
|
Question
How can my computer recognize "160 GB Samsung HDD"? |
Question
The graphics card "ASUS ATI RADEON 9200 SE/TD/128mb/AGP 8X" does not work on my P4VMM2. |
Answer
Due to H/W chipset limitation, this M/B does not support 8X AGP VGA card. Please use 4X AGP VGA card on this board.
|
Question
What's the maximum HDD I could use on P4VMM2 V1.x M/B? What's the latest BIOS for this M/B? |
Answer
The P4VMM2 V1.x supports IDE HDD up to 250GB. The latest BIOS for it is ver. 2002/08/30. Please refer to attached file & run it under Clean MS-DOS mode (boot from bootable FDD), A:\> AMINF341 020830S.ROM.
|
Question
I would like to know if I can run a Celeron D 335 Processor 2800 in this motherboard. Is there any updates that I need to do to get this working? |
* means validated by ECS at time of writing. Changes to component or CPU may produce a different outcome. The result shown is for reference only and is subject to change w/o notification.| Socket | Family | Processor | Wattage | Frequency | Cache | Stepping | Since BIOS | | Socket 478 | Intel Pentium 4 | N/A | N/A | 1.6 GHz | 256K | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 1.6A GHz | 256K | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 1.7 GHz | 256K | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 1.8 GHz | 256K | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 1.8A GHz | 512K | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 1.9 GHz | 256K | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 2.0 GHz | 256K | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 2.0A GHz | 512K | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 2.2 GHz | 512K | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 2.26 GHz | 512K | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 2.4 GHz | 512K | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 2.4A GHz | 1M | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 2.4B GHz | 512K | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 2.5 GHz | 512K | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 2.53 GHz | 512K | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 2.6 GHz | 512K | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 2.66 GHz | 512K | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 2.8 GHz | 512K | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 2.8A GHz | 1M | N/A | 1.1f | | Socket 478 | Intel Pentium 4 | N/A | N/A | 3.06 GHz | 512K | N/A | 1.1f | | Socket 478 | Intel Celeron D | 325 (Prescott) | N/A | 2.53 GHz | 256K | N/A | 1.1f | | Socket 478 | Intel Celeron D | 330 (Prescott) | N/A | 2.66 GHz | 256K | N/A | 1.1f | | Socket 478 | Intel Celeron D | 335 (Prescott) | N/A | 2.8 GHz | 256K | N/A | 1.1f | | Socket 478 | Intel Celeron D | 340 (Prescott) | N/A | 2.93 GHz | 256KB | N/A | 1.1f | | Socket 478 | Intel Celeron D | 345 (Prescott) | N/A | 3.06 GHz | 256K | N/A | 1.1f | | Socket 478 | Intel Celeron | N/A | N/A | 1.7 GHz | 128K | N/A | 1.1f | | Socket 478 | Intel Celeron | N/A | N/A | 1.8 GHz | 128K | N/A | 1.1f | | Socket 478 | Intel Celeron | N/A | N/A | 2.0 GHz | 128K | N/A | 1.1f | | Socket 478 | Intel Celeron | N/A | N/A | 2.1 GHz | 128K | N/A | 1.1f | | Socket 478 | Intel Celeron | N/A | N/A | 2.2 GHz | 128K | N/A | 1.1f | | Socket 478 | Intel Celeron | N/A | N/A | 2.3 GHz | 128K | N/A | 1.1f | | Socket 478 | Intel Celeron | N/A | N/A | 2.4 GHz | 128K | N/A | 1.1f | | Socket 478 | Intel Celeron | N/A | N/A | 2.5 GHz | 128K | N/A | 1.1f | | Socket 478 | Intel Celeron | N/A | N/A | 2.6 GHz | 128K | N/A | 1.1f | | Socket 478 | Intel Celeron | N/A | N/A | 2.7 GHz | 128K | N/A | 1.1f | | Socket 478 | Intel Celeron | N/A | N/A | 2.8 GHz | 128K | N/A | 1.1f |
|
Model:
|
|
P4VMM2
|
|
PCB Version:
|
|
V8.1
|
|
Expansion_Slot:
|
|
AGP4X
|
|
|
|
|
|
USB:
|
|
2.0
|
|
|
|
Audio Pin:
Front Panel Audio Connector
|
|
|
|
USB Pin:
Front Panel USB Connector
|
|
|
|
IR Pin:
Infrared Port
|
|
|
|
|
|