Q: Do I need to buy CPU for LIVA MINI PC? 

There's no need for extra CPUs. LIVA MINI PC adopts Intel® SoC (System-on-a-Chip), which is a system level integration that integrates all components, including CPU, into a single chip, making LIVA MINI PC extremely small and mobile.




Q: How to prevent Bluetooth Device of LIVA MINI PC from disconnection? 

To solve the problem, please follow below settings.

Device Manager -> Bluetooth Radio -> Power management
-> "Allow the computer to turn off the device to save power" to cancel as below screenshot.




Q: Why can’t I press keyboard of LIVA MINI PC to enter BIOS Menu? 

Windows 8 “Fast Boot” function greatly shortens the time for entering BIOS Menu. Please refer to below link to disable “Fast Boot“.
http://download.ecs.com.cn/dlfileecs/faq_file/Fast_Startup_in_System_Settings_en.pdf

 

 




Q: Ubuntu can’t boot up without monitor plugged to LIVA MINI PC 

Due to Ubuntu security setup, LIVA MINI PC won’t boot up without monitor plugged in under Ubuntu OS. So we suggest you to connect the monitor when first booting up, during the system power on, hot plugging of the monitor is acceptable.

For more information to solve the issue, please check on official forum of Ubuntu:

http://ubuntuforums.org/showthread.php?t=1223504




Q: Does LIVA MINI PC support PXE boot function? 

Yes, please set “Launch Network OpROM [Enabled]” in BIOS setup, then Save & Exit the setup.



 




Q: How to install Win8.x into LIVA MINI PC from USB drive? 

Q: System stays at POST screen when I attempt to install Win8.1. What should I do? 

It is normal that system will stay at POST screen like following screenshot for a while to initial the setup configuration when you install Win8.1. Please don’t shut down or restart system. Just keep patience to wait for 2~3 minutes. Then the Win8.1 setup will proceed further.




Q: What kind of OS version should I use on LIVA X? 

Please check following table for OS version, BIOS item and Hard Disk device.




Q: How to setup wake of LAN (WOL) feature of LIVA MINI PC? 

Please follow below guide to set up WOL function.
1. To enable WOL in BIOS, please access "Power Management Setup" in BIOS setup menu to set "Resume By PME" as [Enabled].


2. Disable "EUP Function" of "Power Management Setup" as following picture. Save & Exit CMOS Setup. (Note: It's a must to disable EUP if you intend to enable WOL function on LIVA MINI PC.).


3. It’s a must to uncheck ”Turn on fast startup” feature as following picture if your OS is Windows 8/8.1, then you can use Magic Packet to wake up your system from a subnet different system.




Q: How to setup RTC Alarm feature of LIVA MINI PC? 

Please follow below steps to configure your BIOS. Then RTC Alarm should work on LIVA MINI PC
1. Disable "EUP Function" of "Power Management Setup" like following picture.
(Note: It's a must to disable EUP if you intend to enable RTC Alarm on LIVA MINI PC)


2. When setting "Resume By RTC Alarm" to [Every Day] as below screenshot.


3. Please specify the time in below items you hope to turn on the system (in this example the time is set to 00:03:00.).


4. If you set "Resume By RTC Alarm" to [Enabled] as below.


5. You must specify which day & when you like to turn on system (in this case, we set it to Day 1, 00:03:00. So system will automatically power on at 00:03:00 of the 1st day in each month.).


6.It’s a must to uncheck ”Turn on fast startup” feature as following picture if your OS is Windows 8/8.1.




Q: How to install Ubuntu 14.04 into LIVA X 

If you would like to install Ubuntu 14.04 into LIVA X, please refer to Ubuntu Installation Guide and download related drivers to get it down.

Ubuntu Installation Guide

http://download.ecs.com.tw/dlfileecs/manual/liva/Ubuntu_Installation_livax.pdf

Download Drivers

http://www.ecs.com.tw/extra/ubuntu_driver.zip




Q: Why my ECS motherboard or LIVA mini PC can’t boot up from Windows 10 USB Drive 

ECS motherboard didn’t support NTFS file format in AMI base UEFI BIOS, it means you can’t boot from USB pen drive made by Microsoft USB Tool. Therefore, ECS engineer announce “Windows 7/10 Image Builder” which create an FAT format USB bootable drive.
 
Please download the latest Windows 7/10 Image Builder via Download Link and follow the steps on below URL to get it done.
l Download Link 
 
l How to Use
 
 
 




TOP