This site uses cookies to only capture URL parameters, count visitor number, share functions and etc.
Please visit ECS's Privacy Policy for further information.
By continue browsing our website, you are hereby aware of and agree on ECS' use of cookies by clicking 'ok'.
OK

Question
Does the LAN chip (3C920MV) support SNMP (Simple Network Management Protocol)on 865G-M V2.3?


Answer
The 3C920MV LAN chip on 865G-M V2.3 supports SNMP. Please refer to the readme.txt file from our CD-Driver as follows
***************************************************************************************************************************
3Com (R) Corporation 3C90x 10 Mbps and 10/100 Mbps PCI NIC Family Release Notes and Frequently Asked Questions ------------------------------------------------------------ The EtherCD version 5.4 CD supports 3Com 10 Mbps and 10/100 Mbps PCI bus-mastering network interface cards (NICs) with a common driver set. Key product features include: - Parallel Tasking II (R) architecture for high performance - Bus mastering for low CPU utilization and optimal overall system performance - Automatic selection of media type and link speed for 10/100 Mbps NICs - Full duplex enabled for switched 10/100 Mbps environments - Broad driver support, including NetWare, NDIS 2.01, NDIS 3.0, NDIS 4.0, NDIS 5.0, and others - SNMP manageability - Lifetime limited warranty ****************************************************************************************************************************



Question
Could you let me know if 865G-M PCB 2.3 (for CKD project) supports IEEE802.3x?


Answer
The 865G-M onboard LAN does support IEEE802.3x.


Question
Does 865G-M V2.3 supprot RAID1 function with SATA HDD?


Answer
The sourth bridge of 865G-M V2.3 comes with Intel ICH5  which does not support Intel SATA RAID0 & RAID1.


Question
What is the maximum CPU and HDD capacity supported in 865G-M v2.x M/B?


Answer
865G-M v2.x, maximum CPU and HDD supported information as below, HDD: 400G Pentium 4 400Mhz FSB (256K/512K L2 cache) CPU – 2.6G Pentium 4 533Mhz FSB (512K L2 cache) CPU – 2.8G Pentium 4 800Mhz FSB (512K L2 cache) CPU – 3.2G Celeron 400Mhz FSB (128K L2 cache) CPU – 2.8G Pentium 4 533/800Mhz FSB (512MB/1M L2 cache) HT CPU – 3.4EG Celeron D 533Mhz FSB (256K L2 cache) CPU – 2.8G


Menu