This site uses cookies to only capture URL parameters, count visitor number, share functions and etc.
Please visit ECS's Privacy Policy for further information.
By continue browsing our website, you are hereby aware of and agree on ECS' use of cookies by clicking 'ok'.
OK

Question
Why I connect front audio panel MIC, but the rear panel Audio line out will not have the voice?


Answer
It's the limitation. You could not inser the front MIC or Headphone jack if you want to line out the speaker from the back I/O panel.


Question
The SATA HDD cannot be recognized during Win XP setup, how can I do?


Answer
Please follow the steps below to install Win XP.

1. Boot system from OS installation CD in the CD/DVD-ROM. 
2. Make sure your BIOS has updated to VT6420 during POST. 
3. Press "F6" when OS setup starts running. 
4. Insert floppy disk. 
5. Choose the OS device driver to load SATA driver.
6. Install OS.
7. Run setup.exe to install MB drivers after OS is installed.



Question
Does KT600-A support CPU voltage adjustment by BIOS?


Answer
No, the KT600-A 1.0 doesn't provide "CPU voltage adjustment" because it's possible to cause CPU demage.


Question
Why does my KT600-A recognize the AMD Sempron 3000+ 2.17GHz as a 1.3GHz processor?


Answer
Please set the jumper to 166MHz(JP8 2-3 JP9 2-3) on the MB.


Question
Why SATA cannot be detected during POST, does KT600-A support the SATA HDD?


Answer
1. Please update BIOS to v1.2C attached and flash the BIOS under DOS mode.
2. After flash finished, please access BIOS Setup to enable "Onchip SATA Device" of  "Integrated Peripherals".
3. Then the SATA HDD should be detected on POST.



Question
Why does Windows XP always show the AMD Sempron 2400+ as 1000MHz on my KT600-A?


Answer
Please set "CPU FSB clock" from 100MHz to 166MHz in BIOS to get the correct processor frequency.


Question
Which is the new AWARD FLASH utility for KT600-A?


Answer
The latest  AWARD Flash utility for KT600-A is v8.32 as attached file.


Question
How to change the boot priority from PATA to SATA or vice versa on KT600-A V1.0?


Answer
To boot from PATA device, please set the "First Boot Device" to [HDD-0].
For SATA boot, please change the "First Boot Device" to [SCSI].



Question
Does KT600-A V1.0 support S3 function?


Answer
No, the KT600-A does not support S3 function.


Question
The hard disk LED doesn't work with SATA HDD. It works only with IDE hard disk.


Answer
The KT600-A did not support the hard disk LED for SATA HDD.


Question
Why the keyboard power on function does not work on KT600-A V1.0?


Answer
KT600-A doesn't support K/B power on function, please refer to the user manual on page86 for the detail.


Question
What is the maximum CPU and HDD capacity supported on KT600-A v1.x?


Answer
KT600-A v1.x maximum CPU and HDD supported information as below,
HDD:400G
CPU: AMD Duron 200Mhz FSB CPU - 950 AMD Duron 266Mhz FSB CPU - 1800
           AMD Morgan 200Mhz FSB CPU - 1.4G 
           AMD Athlon 200Mhz FSB CPU - 1.4G AMD Athlon 266Mhz FSB CPU - 1.4G 
           AMD Palomino 266Mhz FSB CPU - 2.1G 
           AMD Athlon XP (0.13u) 266Mhz FSB CPU - 2600+ AMD Athlon XP (0.13u) 333Mhz FSB CPU - 3000+
           AMD Athlon XP (0.13u) 400Mhz FSB CPU - 3200+ 
           AMD Sempron 333Mhz FSB CPU - 3000+



Menu