help_outline

Does P4IBMS support "chassis open detect"? I am unable to find the setting on the motherboard.

help_outline

Please show me what problme is solved by 1.13b.I tested the following test cases on Win98 and WinME1. Sis screen saver : 1min / Monitor off : 2min == system cannot resume2. 3D Flower box screen saver : 1:min / Monitor off : 2min == systemcannot resume

help_outline

On the P4IBMS BIOS ver 1.0D with an ATI Xpert 2000 Pro (Rage 128 Pro Ultra chipset) video card installed the system will not successfully recover from a Suspend To Ram. The system suspends fine, then when the power button is pressed to wake the system, the screen fills with garbage and the system reboots. In the BIOS when S1 is selected in place of S3, the system works. The same ATI video card works on ASUS and Giga-Byte boards with the Intel i82845 chipset. The operating systems I have tried are Windows 2000 Pro (Service Pack 2) and Windows XP Pro.

help_outline

Could you please let me know what is VID 0 - 4 for? I did not find it fromuser's manual but on the silk screen it says VID0-4 for CPU VOL and short 1-2 isnormal and 2-3 is GND. Could you please explain to me when and how we shoulduse this jumper settings?

help_outline

what voltages are, for all VID jumper configurations?

help_outline

21. Problem Description:The following error message appears at DirectSound test in DirectX Diagnostic Tool.This audio card does not support hardware buffer. Software buffer needs to be used.Is this as designed?

help_outline

P4IBMS and the P4IBAS boards have similar problem that the SMBIOS is not properlyreporting the number of PCI slots. you can see this through WMI (partof the OS) or through your DMICFG utility.

help_outline

Using three modules of 1GB registered ECC memory (3x1GB total 3GB), the board keeps restarting under Windows Me.

help_outline

What is the maximum CPU and HDD capacity supported in P4IBMS v1.0X M/B ?