首页产品MotherboardP4VMM2
此产品相关 FAQ 如下
help_outline
Can I mix SDRAM and DDR memory modules on P4VMM2 V1.2 at the same time?
No, please don't mix SDRAM and DDR memory modules at the same time. Otherwise, the motherboard may be damaged.
help_outline
Can I mix SDRAM and DDR memory modules on P4VMM2 V3.1 at the same time?
No, please don't mix SDRAM and DDR memory modules at the same time. Otherwise, the motherboard may be damaged.
help_outline
Can I mix SDRAM and DDR memory modules on P4VMM2 V5.0A at the same time?
No, please don't mix SDRAM and DDR memory modules at the same time. Otherwise, the motherboard may be damaged.
help_outline
Does P4VMM2 V8.1 support 80GB HDD & higher?
Yes, the P4VMM2 V8.1 supports hard drive capacity up to 160GB.
help_outline
Does P4VMM2 support AGP 8X?
No, the P4VMM2 V8.1 supports AGP mode up to 4X (1.5V only). You can install an AGP 8X card on this MB but the card will run with AGP 4X mode.
help_outline
What is the APM spec supported on P4VMM2 V8.1?
The P4VMM2 V8.1 is cpmpliant with APM V1.2.
help_outline
What is the DMI version supported on P4VMM2 V8.1?
The P4VMM2 V8.1 is compliant with DMI V2.3.
help_outline
What is the AC97 spec supported on P4VMM2 V8.1?
The P4VMM2 V8.1 is compliant with AC97 v2.3.
help_outline
Does P4VMM2 V8.1 support Hyper-Threading technology or not?
Yes, the P4VMM2 V8.1 supports Hyper-Threading technology.
help_outline
Which type of AGP card is supported by P4VMM2 V7.3 & does it support PC2700 DDR module? Can I install PC3200 DDR RAM with FSB 533 MHz on this MB?
1.The P4VMM2 V7.3 is compliant with 1X/2X/4X AGP 2.0 card with 3.3V and 1.5V.
2.The P4VMM2 V7.3 only supports PC2100 DDR. But you still can use PC 2700 DDR, the memory speed will
downgrade to PC2100.
2.The P4VMM2 V7.3 only supports PC2100 DDR. But you still can use PC 2700 DDR, the memory speed will
downgrade to PC2100.
help_outline
Why does the system freeze/hang if I try to open many layers in Adobbe Photoshop?
Please update BIOS to v1.1F attached below to solve this Adobe Photoshop 7 issue.
help_outline
为什么P4VMM2 V8.1 BIOS启东时只侦测到1.8GHz,而我安装的是P4 2.4GHz CPU?
在启动的时候,请按 "Del"键进入BIOS Setup 来设置正确的CPU频率. 这个设置与你的CPU的FSB有关,. (如, 当CPU为P4 2.40G/533MHz FSB时, 请设置 CPU 频率为 133MHz.)
help_outline
请问 P4VMM2 V1.3支持的最大高的CPU是多少?
P4VMM2 V1.3 支持的 CPU 最高为 P4 2.6GHz( FSB 400MHz).
help_outline
请问P4VMM2 V8.1是否支持Celeron D 315(2.26GHz)和320(2.4GHz) E0 stepping CPU?
P4VMM2 V8.1的V1.1F BIOS可以支持P4 Prescott 3.4G E0 & Celeron D CPU, 如您的系统配合Celeron D CPU运行不稳定, 请更新V1.1F BIOS.
help_outline
当我安装ATI Radeon 9600显卡到P4VMM2 V1.3主板上, 为什么系统不能显示?
ATI Radeon 9600显卡是AGP 8X显卡, 因此主板只支持到AGP 4X显卡, 所以会出现开机无显.
help_outline
P4VMM2 V8.1的BIOS不能保存,请问如何解决?
请更新到v1.1f版本BIOS解决这个问题.
1. 在官网下载v1.1f版本BIOS,解压缩后拷到可引导的软盘.
2. 插入软盘,开机,引导到DOS下.
3. 执行刷BIOS A:>\awd832b XXX.bin /sn/py/r
4. 刷完BIOS后重启,进入BIOS里加载优化设置,保存退出BIOS设置界面.
1. 在官网下载v1.1f版本BIOS,解压缩后拷到可引导的软盘.
2. 插入软盘,开机,引导到DOS下.
3. 执行刷BIOS A:>\awd832b XXX.bin /sn/py/r
4. 刷完BIOS后重启,进入BIOS里加载优化设置,保存退出BIOS设置界面.
help_outline
我需安装外接显卡,请问如何关闭板载显卡?
当您安装上外接显卡时,板载显卡会自动被关闭,外接显卡会自动被侦测作为第一显示输出.
help_outline
请问P4VMM2 V8.1是否可支持160GB Samsung HDD?
请访问以下链接下载并更新最新的BIOS,此BIOS可支持最大容量250GB硬盘.
Please refer to Product page - Download tag
Please refer to Product page - Download tag
help_outline
P4VMM2 V8.1的AGP插槽只支持4X APG显卡,请问是否可接"ASUS ATI RADEON 9200 SE/TD/128mb/AGP 8X"显卡?
因为硬件设计上的限制,此主板只支持4X AGP显卡,如用户安装8X AGP显卡,有可能引起系统不开机或者运行不稳定.
help_outline
请问P4VMM2 V1.x能支持最大容量的硬盘是多少?最新的BIOS版本是什么?
P4VMM2 V1.x 能支持最大容量的硬盘是250GB. 最新的BIOS版本是2002/08/30. 请在DOS下刷新BIOS A:\> AMINF341 020830S.ROM.
help_outline
请问P4VMM2 V7.3是否能支持Celeron D 335 CPU?
P4VMM3 V7.3可以支持Celeron D 335 CPU.
如您的系统配合此CPU运行不稳定,请更新30703 BIOS.
下载链接如下:
Please refer to Product page - Download tag
如您的系统配合此CPU运行不稳定,请更新30703 BIOS.
下载链接如下:
Please refer to Product page - Download tag
More Question?
请点选 一般常见问题 或填写 技术支持表 提交您的问题
