Página inicialProdutosMotherboardPM800-M2
PM800-M2(V1.0) (no longer for sale)
PM800-M2(V1.0) (no longer for sale)
FAQs for This Model
help_outline
Why the system hangs at IDE detection with LG52X CDROM?
Please update the BIOS to v1.2d to slove the issue.
help_outline
The system got error message when running memory test program with Elixir DDR400 512M x2, how can I fix it?
Please update the BIOS to v1.2d or above to fix it. You can link the website below to download it. (Download -> BIOS)
Please refer to Product page - Download tag
Please refer to Product page - Download tag
help_outline
Does PM800-M2 support Celeron D & Prescott CPUs?
Yes, the PM800-M2 supports Celeron D CPU up to 3.06GHz & P4 Prescott CPU up to 3.4GHz.
help_outline
Does PM800-M2 support Celeron 1.7GHZ CPU?
Yes, the PM800-M2 supports Celeron from 1.7GHZ to 2.6GHZ with 400MHz FSB.
help_outline
Which version of AWARD flash utility can I use on PM800-M2?
Please use AWDFLASH v8.32 and link the website below to know how to use it correctly.
http://www.ecs.com.tw/extra/flashutl/index.html
http://www.ecs.com.tw/extra/flashutl/index.html
help_outline
The system always hangs at POST when running the Intel P4 3.2G/1M/800 SL7PN E0 stepping Philippines CPU, how can I fix it?
Please update the BIOS to v1.2c attached or above to fix it, you can link the website below to get the BIOS. (Download -> BIOS)
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=453&CategoryID=1&MenuID=18&LanID=0
http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=453&CategoryID=1&MenuID=18&LanID=0
help_outline
I got the color in 16 bit after installing the VGA driver under Windows 2000 on PM800-M2, how can I do next?
Please update to the latest VGA driver to fix it. You can link the website below to download it. (Download -> Driver)
Please refer to Product page - Download tag
Please refer to Product page - Download tag
help_outline
Why does Apacer 1G DDR400 w/ Samsung memory chip get instability on PM800-M2 1.0?
Please update attached BIOS to patch it. If you didn't get instability with DDR400, please don't update this BIOS. Since VIA PM800 chipset memory timing tolerance is very small, the standard released BIOS does not cover all the DDR400.
help_outline
There is a message - "Warning! CPU has been changed or CPU Ratio changed fail" during PSOT of my PM800-M2. How can I fix it?
Please follow the steps below to fix it.
1. Power off computer.
2. Remove the CMOS jumper to clear CMOS mode (JP1,2-3) for 30 seconds.
3. Resume the CMOS jumper back to normal mode (JP1,1-2) & then power on your system again.
Please refer to attached file for jumper setting.
1. Power off computer.
2. Remove the CMOS jumper to clear CMOS mode (JP1,2-3) for 30 seconds.
3. Resume the CMOS jumper back to normal mode (JP1,1-2) & then power on your system again.
Please refer to attached file for jumper setting.
help_outline
How can I disable the onboard VGA on PM800-M2?
The onboard VGA will be disabled automatically when you insert an external AGP VGA card.
help_outline
Do you release Hardware Monitor utility for PM800-M2?
No, we don't have the Hardware monitor utility for PM800-M2. Maybe you can use hardware monitor from the third party. It's easy to find it via Internet. (For example: Sandra 2005.. etc)
help_outline
Does PM800-M2 have PXE or RPL LAN boot?
PM800-M2 has only PXE boot function.
help_outline
We encounter the KingMax 512M DDR400 memory in PM800-M2. It's unstable.
Please update attached BIOS for KingMax 512M DDR module.
help_outline
Meu ECS PM800-M2 não pode detectar meu 80GB WD Sata disk.A que o bios onboard SATA é permitido.
Alcance por favor o "BIOS setup" -- "periferios integrados" -- "ATRAVÉS do dispositivo de OnChip IDE" ao jogo de "modalidade SATA" a [ IDE ] e conserve a mudança. Verifique então se o SATA HDD for detectado após o reboot.
More Question?
Please click General FAQ or fill out Technical Support Form to submit your question.
