ДомойТоварыMotherboardL7VMM2
L7VMM2(V2.0) (no longer for sale)
L7VMM2(V2.0) (no longer for sale)
FAQs for This Model
help_outline
Does L7VMM2 V1.0A support 80GB HDD & higher?
Yes, the L7VMM2 V1.0A supports hard drive capacity up to 160GB.
help_outline
Why I cannot use Keyboard to power on the system?
L7VMM2 v1.0A does not support power on by Keyboard function.
help_outline
What is the JP3 jumper function near the BIOS chip?
The JP3 3-pin jumper is for BIOS flash function. 1-2 short = ENABLE 2-3 short = DISABLE
help_outline
Where can we download the correct driver for the on-board LAN of L7VMM2?
Please download the LAN driver from our ECS website as below, thanks.
Please refer to Product page - Download tag
Please refer to Product page - Download tag
help_outline
How to connect the pin assignment of audio header on L7VMM2 V2.0?
Below are the Pin Signal Names & Functions
1- AUD_MIC Front Panel Microphone input signal
2- AUD_GND Ground used by Analog Audio Circuits
3- AUD_MIC_BIAS Microphone Power
4- AUD_VCC Filtered +5 V used by Analog Audio Circuits
5- AUD_FPOUT_ R Right Channel Audio signal to Front Panel
6- AUD_RET_ R Right Channel Audio signal to Return from Front Panel
7- HP_ON Reserved for future use to control Headphone Amplifier
8- KEY No Pin
9- AUD_FPOUT_L Left Channel Audio signal to Front Panel
10- AUD_RET_L Left Channel Audio signal Return from Front Panel
Audio1 pin has 2 jumpers that cross in Pin 5-6 and 9-10. If you don't connect the front audio cable on it, you have to short 5-6, 9-10. Otherwise, the I/O panel Auido out won't get sound output.
1- AUD_MIC Front Panel Microphone input signal
2- AUD_GND Ground used by Analog Audio Circuits
3- AUD_MIC_BIAS Microphone Power
4- AUD_VCC Filtered +5 V used by Analog Audio Circuits
5- AUD_FPOUT_ R Right Channel Audio signal to Front Panel
6- AUD_RET_ R Right Channel Audio signal to Return from Front Panel
7- HP_ON Reserved for future use to control Headphone Amplifier
8- KEY No Pin
9- AUD_FPOUT_L Left Channel Audio signal to Front Panel
10- AUD_RET_L Left Channel Audio signal Return from Front Panel
Audio1 pin has 2 jumpers that cross in Pin 5-6 and 9-10. If you don't connect the front audio cable on it, you have to short 5-6, 9-10. Otherwise, the I/O panel Auido out won't get sound output.
help_outline
Is the PCI Spec. of L7VMM2 2.0 or 2.2 compliant?
The L7VMM2 V1.1 PCI is compliant with PCI specification v2.2.
More Question?
Please click General FAQ or fill out Technical Support Form to submit your question.
