This site uses cookies to only capture URL parameters, count visitor number, share functions and etc.
Please visit ECS's Privacy Policy for further information.
By continue browsing our website, you are hereby aware of and agree on ECS' use of cookies by clicking 'ok'.
OK

Question
I got ATI Radeon 9800SE, and Windows hangs or hangs on start.


Answer
Since the 4X AGP slot design of hardware that is difference from 8X AGP slot, so we don't guarantee all of the 8x garphic card can suit with your M/B. Please be infromed that and the table of compared for your reference. AGP1.0 AGP2.0 AGP3.0 Signaling 3.3V signaling 1.5V Signaling New 0.8V Signaling Protocol Pipelined transactions + AGP1.0 + Fast Writes AGP2.0 + Some Source synchronous enhancements – some clocking deletions (See Sec1.5.1) Speeds 2X, 1X 4X, 2X, 1X 8X, 4X Connector 3.3V keyed 1.5V keyed, Universal 1.5V keyed, Universal


Question
Why does POST display "unknown AMD 2200+" on K7VZA when a Duron 1800+ CPU is installed?


Answer
The K7VZA only supports Duron to 950MHz/FSB 100MHz CPU. So it does not support a Duron 1800+/FSB 133MHz CPU.


Question
Can I apply K7VZA V3.0 BIOS on K7VZA V1.0 MB?


Answer
You are not allowed to apply K7VZA V3.0 BIOS on K7VZA V1.0 MB because these 2 PCBs come with different HW designs.


Question
What kind of CPUs are supported by K7VZA V3.0?


Answer
The K7VZA V3.0 supports AMD Palomino to 1.2GHz(133MHz) and AthlonXP to 2600+(0.13u/133MHz).


Question
Does the K7VZA V3.0 support AMD Athlon XP 2600+ CPU?


Answer
Yes, please update K7VZA V3.0 BIOS V3.7 to support the Athlon XP 2600+(133/0.13) CPU.


Question
What is the maximum CPU which can be used on K7VZA V3.0?


Answer
Please update the K7VZA V3.7 BIOS to support AMD Athlon XP 2400+ & 2600+ CPU (0.13u).
Flash BIOS procedures are as follows
1. Extract the utility to a disk and copy BIOS .bin file to this disk.
2. Boot from floppy with bootable disk.
3. Insert the disk with utility and BIOS
4. Execute the awd832b XXX.bin /sn/py/r
5. Load the default setting.



Question
Where can I download the audio driver for K7VZA V3.0?


Answer
Please download the audio driver from our ECS website as below. Please refer to Product page - Download tag


Question
Could you please describe the pin definition of USB port 3 and 4 on K7VZA V3.0?


Answer
Please refer to attached file for the USB pin definition of K7VZA V3.0.


Question
Can I use the AMD Sempron CPU on my K7VZA? Or AMD Athlon less than 2600+?


Answer
The K7VZA doesn't support AMD Sempron CPUs. It supports AMD Athlon XP CPUs up to 2600+.


Question
请问K7VZA V1.0 支持160GB 硬盘吗?


Answer
不支持, K7VZA V1.0 仅仅能支持最大136GB的硬盘.


Question
Does K7VZA 3.0 support AMD Athlon XP FSB 266MHz CPU?


Answer
Yes, the V3.7 BIOS of K7VZA can support AMD Athlon CPU to 2600+ (0.13u/FSB 266MHz).


Question
I like to update the V3.7 BIOS to upgrade CPU and HDD, but why M/B can't flash BIOS by winflash?


Answer
The K7VTA V3.0 can suuport CPU to AMD Athlon XP 2600+(0.13u) and HDD can support to 250GB.
Below are Flash BIOS procedures
1.Please update BIOS under pure DOS mode
2. Boot from a bootable disk.
3. Insert a disk with awd832b.exe and vza37.bin ROM file.
4. Execute "awd832b vza37.bin /sn/py/r" command under A:>
5. Load the default setting.



Question
What the maximum speed of the CPUs can be support on K7VZA M/B?


Answer
Please help to check your PCB version, and follow lists to select the CPU for this M/B.
1. PCB 1.0: Duron 800MHz(FSB:100 MHz) & Althon 1.2GHz(FSB 100), and support BIOS is 1.2f version.
2. PCB 1.0A: Duron 800MHz(FSB:100 MHz) & Althon 1.2GHz(FSB 100), and support BIOS is 1.2f version.
3. PCB 3.0: Athlon 1.4G(133), Palomino 1.3G(133), Athlon XP 2000+(133, 0.18u) & Athlon XP 2600+(133, 0.13u),
    and support BIOS is 3.7 version.



Question
Why do I flash BIOS with Winflash 1.74 and kzvza_33c.bin, but will get the error message "Please load the correct BIOS file"?


Answer
We suggest you flash BIOS by DOS utility under pure DOS mode, the procedures is as below,
1. Copy BIOS file and flash utility to a disk.
2. Boot from Floppy with the bootable disk, then insert above disk.
3. Execute awd832b XXX.bin /sn/py/r under A:>
4. Load default setting.



Question
What is the maximum CPU and HDD capacity supported on K7VZA v3.x?


Answer
K7VZA v3.x maximum CPU and HDD supported information as below,
HDD:250G
CPU: AMD Duron 200Mhz FSB CPU - 950
           AMD Morgan 200Mhz FSB CPU - 1.3G 
           AMD Athlon 200Mhz FSB CPU - 1.4G AMD Athlon 266Mhz FSB CPU - 1.4G 
           AMD Palomino 266Mhz FSB CPU - 1.2G 
           AMD Athlon XP (0.18u) 266Mhz FSB CPU - 2000+ AMD Athlon XP (0.13u) 266Mhz FSB CPU - 2200+



Question
if use 128 or 256 MB Double side RAM 2pcs then will no function , but if change MB CPU speed to 100MHz than will ok ,oder use single RAM also no problem.


Answer
Update BIOS to JAMA V3.2D could patch. We add some bios code(CLK_CTL) owing to AMD recommandation


Question
The board work correctly with a AMD Processor at 100 Mhz but in thelast days I have a problems with AMD Athlon at 133 Mhz on t his motherboard. Like a AMD T-Bird 1200,1333, and 1400 Mhz.All seems work fine but when I have finished to install Windows 98s ethe sistem Hang and crash before to come to desktop.This probl ems I have find on more of one MA AV363B.Exist a solution ? The bios is the last one version, I have checkedyour web site for informations but nothing.


Answer
V3.3B bios could patch 266FSB unstable issue.


Menu