This site uses cookies to only capture URL parameters, count visitor number, share functions and etc.
Please visit ECS's Privacy Policy for further information.
By continue browsing our website, you are hereby aware of and agree on ECS' use of cookies by clicking 'ok'.
OK

Question
Does L7VMM2 V1.0A support 80GB HDD & higher?


Answer
Yes, the L7VMM2 V1.0A supports hard drive capacity up to 160GB.


Question
Why I cannot use Keyboard to power on the system?


Answer
L7VMM2 v1.0A does not support power on by Keyboard function.


Question
What is the JP3 jumper function near the BIOS chip?


Answer
The JP3 3-pin jumper is for BIOS flash function. 1-2 short = ENABLE 2-3 short = DISABLE


Question
Where can we download the correct driver for the on-board LAN of L7VMM2?


Answer
Please download the LAN driver from our ECS website as below, thanks.
Please refer to Product page - Download tag



Question
How to connect the pin assignment of audio header on L7VMM2 V2.0?


Answer
Below are the Pin Signal Names & Functions
 
1- AUD_MIC Front Panel Microphone input signal
2- AUD_GND Ground used by Analog Audio Circuits
3- AUD_MIC_BIAS Microphone Power
4- AUD_VCC Filtered +5 V used by Analog Audio Circuits
5- AUD_FPOUT_ R Right Channel Audio signal to Front Panel
6- AUD_RET_ R Right Channel Audio signal to Return from Front Panel
7- HP_ON Reserved for future use to control Headphone Amplifier
8- KEY No Pin
9- AUD_FPOUT_L Left Channel Audio signal to Front Panel
10- AUD_RET_L Left Channel Audio signal Return from Front Panel

Audio1 pin has 2 jumpers that cross in Pin 5-6 and 9-10. If you don't connect the front audio cable on it, you have to short 5-6, 9-10. Otherwise, the I/O panel Auido out won't get sound output.



Question
Is the PCI Spec. of L7VMM2 2.0 or 2.2 compliant?


Answer
The L7VMM2 V1.1 PCI is compliant with PCI specification v2.2.


Menu