GeForce7050M-M V2.0 only can support AMD AM2+ CPU ,please refer to the CPU support list from the following website .We also suggest the users to use these CPUs on the CPU support list .Thanks !

Please refer to Product page - CPU tag

This board just can support AMD Phenom X4 Quad-Core CPU (95W) as the below CPUs, but not all of AMD Phenom X4 Quad-Core CPU. Please refer to the CPU support list on the following website.

AMD Phenom Quad-Core 9750 (B3) (95W) 2400MHz (512KBx4,3600,Socket AM2+)
AMD Phenom Quad-Core 9650 (B3) (95W) 2300MHz (512KBx4,3600,Socket AM2+)
AMD Phenom Quad-Core 9600 (B2) (95W) 2300MHz (2MB+2MB,3600,Socket AM2+)
AMD Phenom Quad-Core 9550 (B3) (95W) 2200MHz (512KBx4,3600,Socket AM2+)
AMD Phenom Quad-Core 9500 (B2) (95W) 2200MHz (2MB+2MB,3600,Socket AM2+)

CPU Support List URL:
Please refer to Product page - CPU tag


 

It’s normal. The DRAM controller is built-in by AMD processor. The actual DRAM frequency may vary for some speeds based on the CPU clock multiplier and other configuration options, the memory controller automatically adjusts refresh counters at all speeds as required to meet the device refresh specifications, below table 4 for you reference.

The motherboard has one PCI-Express x16 slot, is fully compliant to the PCI-Express Base Specification V1.1. The NV GF8600GTS is belongs to the PCI-Express V2.0 card. The ECS N8600GTS-256MX card is tested qualified and recommended user to use. The below table is the PCI-Express graphical card that ECS had tested and qualified, we strong suggest user to use them when you would like to install additional graphics card.

Please refer to Memory Qualified Vendors List (QVL) have been tested and qualified for use with this motherboard.

The AMD Phenom II 955 BE is AM3 CPU, this model only support AMD AM2/AM2+CPU, so AMD AM3 CPU cannot be supported by this model. The CPU support table listed the CPUs that we had tested and qualified for reference.

This board supports CPU up to 95W TDP only. AMD releases two edition Phenom™ X4 9950 CPUs, one is 125W, the other is 140W, both cannot be supported on this board.